What's New in Solid Edge 2025 - Mechanical Design - Part 4 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 3 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 2 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 1 of 4

NX CAM - Tilt Tool Axis

Quick Roughing - NX2406

Solid Edge - Family of Parts - Part 2 on 2

Solid Edge - Family of Parts - Part 1 on 2

Solid Edge - The Variable Table - Part 3 of 3 - Using Peer Variables and Expose Variables

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Solid Edge University 2021 Links

Shared links from our Solid Edge University Event

3 Simple and Impactful Additive Design Considerations

Manufacturing aids are the perfect first applications to 3D print. We see companies typically saving +50% in cost, shavings days if not weeks off turnaround, and lightening their parts by moving off of metal or solid plastic to fiber reinforced composite parts.

NX Now Stores PDF as Child of UGPart

As you move forward to the more recent release of NX / Teamcenter, you will encounter a change that may cause some confusion. This change was added in NX 1980, however you may not notice this until after we upgrade to a current release of NX /Teamcenter.NX will now store the exported PDF as a child to the UGPart source part.

Geometry Preparation for FEA Analysis in NX or Simcenter 3D

NX or Simcenter 3D pre/post provides a wide range of Geometry Preparation and Synchronous Modeling tools for geometry editing, allowing users to easily modify, repair, and optimize models for accurate simulation.

Solid Edge Tips and Tricks 2023

Our yearly edition of Solid Edge Tips and Tricks, click read more for parts 2 and 3.

Configuring Teamcenter 4-tier connections on a client

The 4-tier client connects to the Teamcenter web tier using HTTP protocol or Teamcenter client communication system (TCCS). HTTP was the standard initially, but then the TCCS protocol was created to increase security and combine the different communications channels with the web tier into a centralized network configuration.

Revolutionizing Product Development: Industrial 3D Printing for Rapid Market Entry and Customer Feedback

Industrial 3D printing, or additive manufacturing, has evolved beyond prototyping and small-batch production. With advances in technology, it's now feasible to use 3D printers for large-scale production, producing high-quality products at quantities sufficient for market entry.

How to perform motion simulation in NX

NX Motion Simulation is a CAE software application you can use to animate and analyze both kinematic and dynamic motion simulations in terms of critical design positions, forces, velocities, and accelerations.

2D to 3D in Solid Edge

Simple technique to turn 2D models to 3D in Solid Edge

Colored Section Cut Faces in SE2023

Reviewing the Colored Section Cut Faces in SE2023, updated for SE2023

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions