Customizing your dimensional output in Solid Edge

Creating a Custom Drawing Template in NX

Growing 3D printing in North America

How to create parameter table in NX

Exemple d’utilisation du module Simulation Avancée de Solid Edge

Using Solid Edge Advanced Simulation

Using NX Join

Some tips on working with Adjustable Assemblies.

Using the Structure Designer Application

Teamcenter Access Manager to Restrict Group Access

The following example outlines a supported procedure using Teamcenter Access Manager to allow a group of users to access only specific documents that have been reviewed and released to production.

Modal Frequency Response Analysis in Simcenter 3D : Part-1. Modal Analysis

Modal analysis is a crucial step in understanding the natural frequencies and mode shapes of structures, providing valuable insights for design optimization. In this comprehensive tutorial, learn how to set up Modal Analysis in Siemens Simcenter 3D using a car bumper as the subject

Solid Edge Buckling Analysis

Calculating critical load by performing buckling analysis on a frame structure.

Nonlinear Plastic Analysis in NX/Simcenter Part 2

Checking the behaviour of sheet metal forming process is most significant aspect for Stamping Industries and crash analysis for Automotive Industries. Do you want to observe the behaviour of your component beyond the yield strength? Conducting a Nonlinear Plastic Analysis by considering geometric & contact nonlinearity and material nonlinearity is a straightforward process with Simcenter 3D.

Linear Study Simulation in Solid Edge Part 2

This video will showcase how to perform a Linear Static Study Simulation in Solid Edge 2023.

Nonlinear Plastic Analysis in NX/Simcenter

Checking the behavior of sheet metal forming process is most significant aspect for Stamping Industries and crash analysis for Automotive Industries.

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions