Saving PDFs from Solid Edge

Maximizing your NC investment with Designfusion's CAM Services

Surface Modeling In Solid Edge

NX CAM G-Code Driven Simulation with a DMG Mori CTX Gamma

NX Webinars

Solid Edge Webinars

Our Response to the Covid_19 Pandemic

Integration between Solid Edge and SolidEdge CAM Pro

Analyzing your Current Designs for Printable Savings

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Solid Edge University 2021 Links

Shared links from our Solid Edge University Event

3 Simple and Impactful Additive Design Considerations

Manufacturing aids are the perfect first applications to 3D print. We see companies typically saving +50% in cost, shavings days if not weeks off turnaround, and lightening their parts by moving off of metal or solid plastic to fiber reinforced composite parts.

What's New in Solid Edge 2022: Frame Enhancements

In this blog, users are introduced to the multiple frame enhancements added in Solid Edge 2022.

Sloshing Analysis using FloEFD

What's New in Solid Edge 2022: Assign Capture Fit

This blog introduces users to the new Assign Capture Fit command in Solid Edge 2022.

Designfusion Additive Manufacturing and Technical Center Grand Opening - Milford, Ohio

On June 3, 2022, we celebrated the official Grand Opening of our new Additive Manufacturing Showroom and Technical Center located in Milford, Ohio!

What's New in Solid Edge 2022: Family of Assemblies Parts List

This blog demonstrates the use of the new Family of Assemblies Parts List in Solid Edge 2022.

What's New in Solid Edge 2022: Assembly Suppression

This blog demonstrates the use of the enhanced suppression capabilities within assembly files in Solid Edge 2022.

Solid Edge Radiate Command

This blog introduces users to the new synchronous radiate command in Solid Edge 2022.

Solid Edge: A Baker's Dozen of Tips and Tricks (Part 3)

Solid Edge: A Baker's Dozen of Tips and Tricks Part 3

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Contact Us

Have a question? Send us an Inquiry

Thank you! Your submission has been received!

Oops! Something went wrong while submitting the form.

Send us an email for a quick response

Call our toll free number and talk with us

Visit our Additive Manufacturing website

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions