Generate a Mass Client installation script with Deployment Center (DC)

NX Feature Author Functionality

Solid Edge 2024 - Lasso Selection Capabilities

Solid Edge 2024 - Auto Dimension Command

Defining Spot Weld in NX/Simcenter 3D

What’s new in Solid Edge 2024 Sheet Metal

NX - Variational Sweep Command

Solid Edge University 2024: Tips and Tricks Part 2 of 2

Solid Edge University 2024: Tips and Tricks Part 1 of 2

The Advantages of Print for Manufacture

Additive Manufacturing enables companies to achieve completely new levels of product performance, manufacturing effectiveness and business results.New software, hardware and material technologies have emerged to completely change the way the products are designed and manufactured.Additive manufacturing is one of the revolutionary technologies that can transform production operations and business models.

Topology Optimization

Accelerate your Product Development process and explore wider range of design options with NX’s Generative Design

Point Cloud in NX

In NX 1899 we can Reverse Engineer the scanned 3D point cloud data to convergent bodies using “Mesh from cloud” tool. A very handy and effective tool to work with organic and complex shapes in the additive manufacturing process.

A Baker’s Dozen of Tips and Tricks – Part 2

In this blog article, I will recap the second part of my annual Baker’s Dozen of Tips and Tricks, which was presented at recent Solid Edge Universities, in Toronto, Winnipeg and Red Deer. What follows is, the PowerPoint slides and links to videos showing what was demonstrated live, at the SEU events.

A Bakers Dozen of Tips and Tricks SE 2020 - Part 1

In this blog article, I will recap the first part of my annual Baker’s Dozen of Tips and Tricks, which was presented at recent Solid Edge Universities, in Toronto, Winnipeg and Red Deer. What follows is, the PowerPoint slides and links to videos showing what was demonstrated live, at the SEU events.

Generative Design Demo

This video covers the transition from a traditionally manufactured part to an additive manufactured part using Generative Design capabilities in Solid Edge.

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions