Generate a Mass Client installation script with Deployment Center (DC)

NX Feature Author Functionality

Solid Edge 2024 - Lasso Selection Capabilities

Solid Edge 2024 - Auto Dimension Command

Defining Spot Weld in NX/Simcenter 3D

What’s new in Solid Edge 2024 Sheet Metal

NX - Variational Sweep Command

Solid Edge University 2024: Tips and Tricks Part 2 of 2

Solid Edge University 2024: Tips and Tricks Part 1 of 2

Assembly Subtract Options

Assembly Subtract Options Video

Tips to Improve the Performance of Solid Edge

We are regularly asked how to improve the performance of Solid Edge. The vast majority of performance issues can be improved by doing one of the following: a) Improve the performance of your computer b) Check your Solid Edge data for errors c)Take the Advanced Assembly course Let’s look at these different topics in some detail.

Creating Holes around a Tube in a Helical Pattern

Recently I had an interesting demo, where I was asked to model a tube with helically patterned holes. I was sure that we could do it, but I was surprised at the simplicity of it. But as I always say, everything is simple if you know what you are doing. Needless to say, the prospect was amazed at the speed with which we made his part and, I’m pleased to say, has become a customer. So, I thought I’d share this knowledge with our blog readers and I hope you find it beneficial.

What's New in Solid Edge 2019

Some of you may be asking “What happen to Solid Edge ST11?”. Siemens PLM has decided to adopt the year format, thus making the next release Solid Edge 2019. Products in the Solid Edge portfolio will also adopt this year format name change. For example, “Solid Edge Illustrations” will be named “Solid Edge Illustrations 2019”.

Working with Large Assemblies - Part 3

In this article, I will continue to focus on some of the Solid Edge tools used to deal with large assemblies.

Working with Large Assemblies - Part 2

In this article, I will continue to focus on some of the Solid Edge tools used to deal with large assemblies.

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions