2D to 3D in Solid Edge

Colored Section Cut Faces in SE2023

Active Workspace & Active Folders in Teamcenter

New NX Sketch Solver

The Markforged Advantage - Fiber Reinforcement , Simulation and Blacksmith Integration

Ordered Sketch Regions in Solid Edge 2023

Workflow Template Filtering with Conditions

Coming this quarter – BASF Ultrasint TPU on our HP JF 5200

Design Optimization in Simcenter 3D

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Solid Edge University 2021 Links

Shared links from our Solid Edge University Event

3 Simple and Impactful Additive Design Considerations

Manufacturing aids are the perfect first applications to 3D print. We see companies typically saving +50% in cost, shavings days if not weeks off turnaround, and lightening their parts by moving off of metal or solid plastic to fiber reinforced composite parts.

Solid Edge - The Variable Table - Part 3 of 3 - Using Peer Variables and Expose Variables

In this final video, you'll explore the use of Peer Variables and how to expose variables.

Solid Edge - The Variable Table - Part 2 of 3 - Creating Formulas and Rules

On this video, you are introduced to the creation and use of formulas and rules in the Solid Edge variable table.

Solid Edge - The Variable Table - Part 1 of 3 - Introduction

In this video, you'll be introduced to the Variable Table.

Nonlinear Buckling Analysis in SC3D / NX

Are you exploring the complexities of post-buckling behavior in structural engineering? Simcenter 3D provides comprehensive tools for this analysis.

Solid Edge - How to use Multi-body modeling functionality

You'll learn how to create and manipulate multiple bodies within a single part file.

Solid Edge - Advanced Sketch Commands and Tools Part 2 of 2

This is part 2 of a 2 part series, where we continue introducing users to the advanced sketch commands and tools inside of Solid Edge.

Solid Edge - Advanced Sketch Commands and Tools Part 1 of 2

This is part 1 of a 2 part series, introducing users to the advanced sketch commands and tools inside of Solid Edge.

Defining Seam Weld in NX/Simcenter 3D

This video provides a step-by-step guide to help you understand and apply seam welds in your projects.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions