Ordered Sketch Regions in Solid Edge 2023

Workflow Template Filtering with Conditions

Coming this quarter – BASF Ultrasint TPU on our HP JF 5200

Design Optimization in Simcenter 3D

How to Create a Custom Draft Template

What's New in Solid Edge 2022: Frame Enhancements

Sloshing Analysis using FloEFD

What's New in Solid Edge 2022: Assign Capture Fit

Designfusion Additive Manufacturing and Technical Center Grand Opening - Milford, Ohio

Getting Started with Solid Edge Tech Pubs

This video provides you with the instructions to get set up with a free trial of Solid Edge Tech Pubs, while highlighting its features.

NX Now Stores PDF as Child of UGPart

As you move forward to the more recent release of NX / Teamcenter, you will encounter a change that may cause some confusion. This change was added in NX 1980, however you may not notice this until after we upgrade to a current release of NX /Teamcenter.NX will now store the exported PDF as a child to the UGPart source part.

Geometry Preparation for FEA Analysis in NX or Simcenter 3D

NX or Simcenter 3D pre/post provides a wide range of Geometry Preparation and Synchronous Modeling tools for geometry editing, allowing users to easily modify, repair, and optimize models for accurate simulation.

Solid Edge Tips and Tricks 2023

Our yearly edition of Solid Edge Tips and Tricks, click read more for parts 2 and 3.

Configuring Teamcenter 4-tier connections on a client

The 4-tier client connects to the Teamcenter web tier using HTTP protocol or Teamcenter client communication system (TCCS). HTTP was the standard initially, but then the TCCS protocol was created to increase security and combine the different communications channels with the web tier into a centralized network configuration.

Revolutionizing Product Development: Industrial 3D Printing for Rapid Market Entry and Customer Feedback

Industrial 3D printing, or additive manufacturing, has evolved beyond prototyping and small-batch production. With advances in technology, it's now feasible to use 3D printers for large-scale production, producing high-quality products at quantities sufficient for market entry.

Tips to Improve the Performance of Solid Edge

We are regularly asked how to improve the performance of Solid Edge. The vast majority of performance issues can be improved by doing one of the following: a) Improve the performance of your computer b) Check your Solid Edge data for errors c)Take the Advanced Assembly course Let’s look at these different topics in some detail.

Creating Holes around a Tube in a Helical Pattern

Recently I had an interesting demo, where I was asked to model a tube with helically patterned holes. I was sure that we could do it, but I was surprised at the simplicity of it. But as I always say, everything is simple if you know what you are doing. Needless to say, the prospect was amazed at the speed with which we made his part and, I’m pleased to say, has become a customer. So, I thought I’d share this knowledge with our blog readers and I hope you find it beneficial.

What's New in Solid Edge 2019

Some of you may be asking “What happen to Solid Edge ST11?”. Siemens PLM has decided to adopt the year format, thus making the next release Solid Edge 2019. Products in the Solid Edge portfolio will also adopt this year format name change. For example, “Solid Edge Illustrations” will be named “Solid Edge Illustrations 2019”.

Working with Large Assemblies - Part 3

In this article, I will continue to focus on some of the Solid Edge tools used to deal with large assemblies.

Working with Large Assemblies - Part 2

In this article, I will continue to focus on some of the Solid Edge tools used to deal with large assemblies.

Working with Large Assemblies - Part 1

One of the most prominent issues, that has bogged down many CAD systems, is the ability to deal with large assemblies. Despite improved hardware and continuing CAD improvements, this issue is still a top complaint among many CAD users. In some cases, it is the CAD system’s architecture that causes the system to slowdown as the assembly size increases. However, with Solid Edge, most cases we encounter are the result of the user being unaware of tools and/or best practices for dealing with large assemblies.

How to save an assembly as a single part file.

I’ve had a couple of calls, on our tech line this month, asking if it’s possible to save an assembly as a single part file. For users who are on ST10 or Solid Edge 2019 the answer is yes. Solid Edge refers to this as a One Body Assembly, and it is part of the Insert Part Copy command.

A baker’s dozen of tips and tricks Part 2 – from 2018 SEU events

This is the second part, of our tips and tricks session, that we presented at our 5 SEU related events in 2018.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions