Solid Edge: A Baker's Dozen of Tips and Tricks (Part 2)

Solid Edge: A Baker's Dozen of Tips and Tricks (Part 1)

Start to Simulate - Simcenter Series

NX Tools for Convergent/ Facet bodies

Tube and Port Milling in Solid Edge CAM Pro and NX CAM

Additive Manufacturing Tools in Solid Edge

NX Mechanism Parting-Lines and Seal-offs

Solid Edge Design Manager

3D Design - Common Assembly Strategies for Additive Manufacturing

Solid Edge - How to use Multi-body modeling functionality

You'll learn how to create and manipulate multiple bodies within a single part file.

Solid Edge - Advanced Sketch Commands and Tools Part 2 of 2

This is part 2 of a 2 part series, where we continue introducing users to the advanced sketch commands and tools inside of Solid Edge.

Solid Edge - Advanced Sketch Commands and Tools Part 1 of 2

This is part 1 of a 2 part series, introducing users to the advanced sketch commands and tools inside of Solid Edge.

Defining Seam Weld in NX/Simcenter 3D

This video provides a step-by-step guide to help you understand and apply seam welds in your projects.

Physical thread Clearance in SolidEdge 2024 for 3D-printed parts

Many issues can arise for 3D-printed parts with physical threads, leading to unusable designs and subsequent prints. Threads without appropriate clearance often cannot be assembled as intended once printed.

Solid Edge University 2024: Family of Parts Enhancements

Explore new ways to customize part families to fit your unique design needs and preferences.

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions