What's New in Solid Edge 2025 - Mechanical Design - Part 4 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 3 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 2 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 1 of 4

NX CAM - Tilt Tool Axis

Quick Roughing - NX2406

Solid Edge - Family of Parts - Part 2 on 2

Solid Edge - Family of Parts - Part 1 on 2

Solid Edge - The Variable Table - Part 3 of 3 - Using Peer Variables and Expose Variables

Workflow Template Filtering with Conditions

In the current and new releases of Teamcenter we will create and use CONDITIONS to manage the filtering of workflow templates. Conditions are powerful expressions which will qualify the use of workflow templates based on one or many different criteria we define. This method of filtering workflow templates provides much more flexibility and capabilities than the traditional tools we used previously.

Coming this quarter – BASF Ultrasint TPU on our HP JF 5200

In January we had the pleasure of spending time with the team at BASF reviewing the market potential of their powder for HP 3D printers. Following that we did some customer outreach and have determined that it is time to bring TPU to the Canadian market. It’s one thing to have samples on hand, but to truly drive adoption customers need to see their applications and see them quick. We’ll be ready this quarter to deliver demos and benchmarks at our Toronto showroom.

Design Optimization in Simcenter 3D

Reduce research time product development costs and product design risks, while learning how to design better faster.

How to Create a Custom Draft Template

What's New in Solid Edge 2022: Frame Enhancements

In this blog, users are introduced to the multiple frame enhancements added in Solid Edge 2022.

Sloshing Analysis using FloEFD

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions