What's New in Solid Edge 2025 - Mechanical Design - Part 4 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 3 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 2 of 4

What's New in Solid Edge 2025 - Mechanical Design - Part 1 of 4

NX CAM - Tilt Tool Axis

Quick Roughing - NX2406

Solid Edge - Family of Parts - Part 2 on 2

Solid Edge - Family of Parts - Part 1 on 2

Solid Edge - The Variable Table - Part 3 of 3 - Using Peer Variables and Expose Variables

NX CAM G-Code Driven Simulation with a DMG Mori CTX Gamma

This video highlights the advanced G-code Driven Simulation integrated with NX for Manufacturing. The DMG Mori CTX Gamma 5-axis machine is easily programmed and the verified using actual G-code before the program is sent to the machine. This capability ensures costly mistakes such as collisions, over travels, setup errors, and more can prevented. G-code Simulation will enhance productivity, increase efficiency and reduce cycle times.

NX Webinars

As part our efforts to support our customers in these challenging times Designfusion is offering this free 5 part webinar series .The invitation is open to your whole company, new employees, casual users and people who have not previously had the time to pick up NX skills.

Solid Edge Webinars

Our Response to the Covid_19 Pandemic

This article will walk you through how this special license can be used to allow you to work from home, using one of these options.

Integration between Solid Edge and SolidEdge CAM Pro

As some of you may already know, Solid Edge has its own manufacturing product called Solid Edge CAM Pro. Prior to ST10 we used NX CAM Express. In ST10, they renamed this to Solid Edge CAM Pro, to ensure that our customer base knew that this manufacturing package was for Solid Edge.

Analyzing your Current Designs for Printable Savings

There are a lot of people we talk to that are very excited about what additive manufacturing is doing to the world. The question that never seems to get asked is the most import. “How do WE get this into our company”. The first response is you have to acknowledge that what we do and how we do it today has rules that we have all accepted and just carry on every day like there are no limiting factors…but there are!

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions