Customizing your dimensional output in Solid Edge

Creating a Custom Drawing Template in NX

Growing 3D printing in North America

How to create parameter table in NX

Exemple d’utilisation du module Simulation Avancée de Solid Edge

Using Solid Edge Advanced Simulation

Using NX Join

Some tips on working with Adjustable Assemblies.

Using the Structure Designer Application

Solid Edge - Family of Parts - Part 2 on 2

Part 2, the final in a series on the family of parts. Looking at the creation of a family of parts.

Solid Edge - Family of Parts - Part 1 on 2

This is Part 1 in a series on Family of Parts. Part 1 looks at the creation of a Family of Parts.

Solid Edge - The Variable Table - Part 3 of 3 - Using Peer Variables and Expose Variables

In this final video, you'll explore the use of Peer Variables and how to expose variables.

Solid Edge - The Variable Table - Part 2 of 3 - Creating Formulas and Rules

On this video, you are introduced to the creation and use of formulas and rules in the Solid Edge variable table.

Solid Edge - The Variable Table - Part 1 of 3 - Introduction

In this video, you'll be introduced to the Variable Table.

Nonlinear Buckling Analysis in SC3D / NX

Are you exploring the complexities of post-buckling behavior in structural engineering? Simcenter 3D provides comprehensive tools for this analysis.

3D Design - Common Assembly Strategies for Additive Manufacturing

This video goes over a few simple but effective methods to assemble 3d printed parts. We cover a few key features in Solid Edge that makes assembling easy and also go over a dovetail joint.

Basic Motion Simulation in Solid Edge

3D printing electronics enclosures with HP Jet Fusion Technology

3D printing with HP Jet Fusion simplifies the process even further. There are zero supports required and assemblies can be printed in place. Common features we see are:

Implicit Modeling in NX

Solid Edge Technical Publications

If your company is struggling with the cost and time wasted on producing accurate technical documentation, perhaps it is time to look at Solid Edge Technical Publications.

Packing Density and Cost Per Part – The Impact of Mass Reduction

When 3D printing a powder bed technology (Jet Fusion, Selective Laser Sintering) one of the most important constraints to consider is the packing density of your build. Packing density refers to the percent of the build volume that is taken up by the printed parts themselves. Depending on your technology and application it is typical to see targets set at 6 – 12%.

Solid Edge Tips and Tricks (SEU)

Our annual Solid Edge Tips and Tricks presented at Solid Edge University 2021

NX Parting Lines Tips

NX Advanced curve and surface features; showing best-practice techniques to improve your mold parting-lines and run-offs.

QUI SOMMES-NOUS

Designfusion s’est développée rapidement pour devenir le plus grand revendeur dédié Siemens PLM en Amérique du Nord. Avec une équipe de soutien de spécialistes et deux décennies d'histoire dans l'industrie, Designfusion est le choix #1 pour les entreprises qui cherchent à optimiser leur acquisition de logiciel.

Blog

À propos de nous

Emplois

Confidentialité Permissions

Produits