Solid Edge - Family of Parts - Part 1 on 2

Solid Edge - The Variable Table - Part 3 of 3 - Using Peer Variables and Expose Variables

Solid Edge - The Variable Table - Part 2 of 3 - Creating Formulas and Rules

Solid Edge - The Variable Table - Part 1 of 3 - Introduction

Nonlinear Buckling Analysis in SC3D / NX

Solid Edge - How to use Multi-body modeling functionality

Solid Edge - Advanced Sketch Commands and Tools Part 2 of 2

Solid Edge - Advanced Sketch Commands and Tools Part 1 of 2

Defining Seam Weld in NX/Simcenter 3D

Coming this quarter – BASF Ultrasint TPU on our HP JF 5200

In January we had the pleasure of spending time with the team at BASF reviewing the market potential of their powder for HP 3D printers. Following that we did some customer outreach and have determined that it is time to bring TPU to the Canadian market. It’s one thing to have samples on hand, but to truly drive adoption customers need to see their applications and see them quick. We’ll be ready this quarter to deliver demos and benchmarks at our Toronto showroom.

Design Optimization in Simcenter 3D

Reduce research time product development costs and product design risks, while learning how to design better faster.

How to Create a Custom Draft Template

What's New in Solid Edge 2022: Frame Enhancements

In this blog, users are introduced to the multiple frame enhancements added in Solid Edge 2022.

Sloshing Analysis using FloEFD

What's New in Solid Edge 2022: Assign Capture Fit

This blog introduces users to the new Assign Capture Fit command in Solid Edge 2022.

Getting Started with Solid Edge Tech Pubs

This video provides you with the instructions to get set up with a free trial of Solid Edge Tech Pubs, while highlighting its features.

NX Now Stores PDF as Child of UGPart

As you move forward to the more recent release of NX / Teamcenter, you will encounter a change that may cause some confusion. This change was added in NX 1980, however you may not notice this until after we upgrade to a current release of NX /Teamcenter.NX will now store the exported PDF as a child to the UGPart source part.

Geometry Preparation for FEA Analysis in NX or Simcenter 3D

NX or Simcenter 3D pre/post provides a wide range of Geometry Preparation and Synchronous Modeling tools for geometry editing, allowing users to easily modify, repair, and optimize models for accurate simulation.

Solid Edge Tips and Tricks 2023

Our yearly edition of Solid Edge Tips and Tricks, click read more for parts 2 and 3.

Configuring Teamcenter 4-tier connections on a client

The 4-tier client connects to the Teamcenter web tier using HTTP protocol or Teamcenter client communication system (TCCS). HTTP was the standard initially, but then the TCCS protocol was created to increase security and combine the different communications channels with the web tier into a centralized network configuration.

Revolutionizing Product Development: Industrial 3D Printing for Rapid Market Entry and Customer Feedback

Industrial 3D printing, or additive manufacturing, has evolved beyond prototyping and small-batch production. With advances in technology, it's now feasible to use 3D printers for large-scale production, producing high-quality products at quantities sufficient for market entry.

How to perform motion simulation in NX

NX Motion Simulation is a CAE software application you can use to animate and analyze both kinematic and dynamic motion simulations in terms of critical design positions, forces, velocities, and accelerations.

2D to 3D in Solid Edge

Simple technique to turn 2D models to 3D in Solid Edge

Who We Are

Designfusion is the largest dedicated solution provider of Siemens PLM software in North America. With an expert support team and a decade of history in the industry designfusion is the #1 choice for companies looking to best enhance their software acquisition.

Products

Solutions